No Water - No Overheating
Classic Cool 180° has a boiling point of 180°C and will not boilover.
No Water - No Corrosion
Water contains oxygen, oxygen allows corrosion. Classic Cool 180° eliminates corrosion.
No Water - No Pressure
Classic Cool 180° allows your cooling system to run at a lower pressure, reducing the strain on engine components.
No Water - No Liner Pitting
Classic Cool 180° generates significantly less pitting when compared with all water based coolants.
No Water - More BHP
Classic Cool 180° eliminates premature detonation associated with overheating.
Traditional water based coolants regularly cross the thermal boundary
that separates efficient Nucleate Boiling (A) from inefficient Critical
Heat Flux (CHF). Critical Heat Flux (CHF) is synonymous with the
condition ‘Departure from Nucleate Boiling’ (DNB). When DNB occurs a
layer of steam bubbles form adjacent to the engine hot-spots (B). Steam
dissipates less than 1/30th of the heat that water does, rapidly
over-heating local metal, causing premature detonation.
Evans Waterless Coolants never need changing. Once in the cooling system Evans will protect for the life of the engine.
Evans Waterless Coolants will not freeze even at temperatures as low as -40°C. Additional anti-freeze is not necessary.
Evans Waterless Coolants contain our patented DeTox™ formulation and
has been classified as Non-Toxic by an EPA certified laboratory. However
as with all chemicals, do not consume. Keep away from children. Avoid
contact with eyes and skin. Rinse hands and eyes with water after